Shenzhen Zeconex Co., Ltd.

Warranty Policy

Version: V1.0

Product Scope: This certificate applies to the full range of AC charging stations and DC charging stations supplied by our company.

1. Warranty Commitment

Shenzhen Zeconex Co., Ltd. warrants that the complete AC and DC charging stations supplied by the Company, including built-in charging modules, control boards, electricity meters, communication boards, and display screens, will be free from defects in materials and workmanship when operated under normal conditions and properly maintained.

The Company provides a limited warranty of twenty-four (24) months (two years), commencing upon completion of the order. During the warranty period, provided that the equipment has been properly installed and operated in accordance with the instructions and within the specified operating conditions, the Company will repair or replace, free of charge, any parts or the complete unit affected by failures caused by defects in the product's materials or manufacturing workmanship. No parts or labor charges will apply to such warranty service.

2. Warranty Service

1. For qualifying quality issues during the warranty period, the Company will provide remote technical diagnosis, software/firmware configuration and debugging, free replacement parts, and on-site repair in accordance with the service level agreed in the contract.

2. Technical support is available 7 days a week, 24 hours a day (7×24).

3. After the warranty period expires, the Company will continue to provide repair services at cost-based rates, spare parts supply, and technical support.

3. Exclusions from Warranty

Any of the following circumstances will void eligibility for free warranty service, regardless of whether the equipment is still within the warranty period. The customer shall be responsible for the costs of repairs, replacement parts and travel expenses, as applicable.

1. Failure to provide valid proof of contract, equipment serial number (SN) or nameplate information; or where the nameplate or SN code has been altered, removed, damaged or worn to the point that it is unreadable.

2. Damage caused by installation, wiring or grounding that does not comply with the user manual; abnormal power supply conditions (including overvoltage, undervoltage, surges, missing neutral conductor or three-phase imbalance); or a power distribution environment that does not meet the product requirements.

3. Unauthorized disassembly, modification, replacement of parts, firmware changes, OCPP communication tampering or alteration of internal wiring without the Company's prior written authorization.

4. Damage caused by misuse or human factors, including impact, flooding, corrosion, foreign object ingress, insects or rodents, chemical contamination or improper cleaning.

5. Operation outside the product specifications, including exposure to excessive temperature, humidity, salt spray or dust; operation at high altitude without the required derating; or operation under unauthorized overload conditions.

6. Charging connectors and charging cables are wear-and-tear components. Damage caused by frequent plugging and unplugging, dragging, vehicle run-over, jacket abrasion or external pulling force is excluded. Separate warranty coverage for charging cables may be agreed in writing in the contract.

7. Natural disasters and force majeure events, including lightning strikes, floods, fires, earthquakes, typhoons, hailstorms, war and civil unrest.

8. Damage caused during transportation or lifting/handling. The customer must inspect the equipment upon delivery. Visible external damage reported after the goods have been accepted and signed for will not be covered by the warranty.

9. Normal cosmetic wear resulting from use, including scratches, discoloration, aging, and ordinary wear and tear.

10. Failures caused by the use of non-original parts, third-party replacement components, or communication compatibility issues with vehicles that are not compatible with the equipment.

11. Failures not attributable to the charging station itself, including those caused by mobile network operator outages, platform server failures, the customer's backend system or vehicle BMS communication abnormalities.

4. Warranty Claim Procedure

1. When a fault occurs, the customer should promptly provide the equipment SN, a description of the fault, any displayed fault code, and relevant on-site photos or videos.

2. The Company will first attempt to identify and resolve the issue remotely. If remote troubleshooting is unsuccessful, the Company will arrange shipment of replacement parts or on-site service in accordance with the contract.

3. The Company will not be responsible for costs arising from repairs carried out independently by the customer or a third party without the Company's prior confirmation.

5. Limitation of Liability

This limited warranty constitutes the Company's sole warranty commitment for the products. It does not cover compensation for any indirect or consequential losses, including downtime, loss of revenue, towing charges, or third-party claims. The Company's maximum liability shall not exceed the purchase price paid for the individual charging station concerned.

In the event of any inconsistency between this warranty certificate and the sales contract, the terms of the duly executed contract signed by both parties shall prevail.

CONTACT US

Looking for a Reliable EV Charger Manufacturer?

Send us your project requirements, and we will provide professional solutions and quotations within 24 working hours. Welcome to be our partner.

Email

sales@zeconex.com

WhatsApp

+86-18603001019

Contact Us Now